UMC9003 - Netzwerkkarte - IRQ ändern ?!?

Konfiguration, Anwendungen, Treiber und TSRs unter DOS
Antworten
Benutzeravatar
matze79
DOS-Gott
Beiträge: 7910
Registriert: So 9. Sep 2012, 20:48

UMC9003 - Netzwerkkarte - IRQ ändern ?!?

Beitrag von matze79 »

Jetzt hab ich ein Blödes Problem, die UMC9003 Karte lässt mich den IRQ nicht ändern.
Dazu gibt es eine Software auf der Treiberdiskette ( LANSET.EXE )
Damit kann ich aber nur die Adresse ändern (0x240, 0x300, 0x280 usw)
Jemand eine Idee wie man zur Hölle den IRQ ändert ?
Ich würde gern meine Maus nutzen während ich im Netzwerk unterwegs bin.
Das DING will immer IRQ 3 ich werd wahnsinnig.

Ohne Parameter startet das Programm nur und meint Press any Key to Continue.
Wenn man eine Taste drückt ist man wieder zurück auf den Screen.
Es schreibt auch eine Config Datei mit dem IRQ drinnen.
Editiere ich diese und lade sie um die Änderung zuspeichern,
nimmt er trotzdem immer IRQ 3.
Ich hab aber 9, 12 und 7 frei. IRQ 3 ist RS232.
. Append for about LANSET command lines options
. It is normally NO need any command line options for most cases
. It can display belows text by only enter the "LANSET /?" command
-------------------------------------------------------------------------------
<16-bit jumperless> LANcard SETup v3.03 NE2000 ETHERNET Compatible [2N/2U/2M]
Usage> LANSET [/Options see below ...]
Common: /RESCUE Force startup RESCUE menu {for I/O collision} (Default:Auto)
/VM Specifies to use colors for Mono-VGA video interface
/T=rate Specifies I/O timming rate on un-stable machines (Default /T=4)
/I Do NOT mask IRQ interrupts. (Default mask card's IRQ in setup)
LAN2Nx: /N Only allow to setup LAN2Nx {chipset: NS DP83906x} cards
/N=port Find & Set a LAN2Nx card to the specified I/O port
LAN2Ux: /U Only allow to setup LAN2Ux {chipset: UMC9003x} cards
/U=port Find & Set a LAN2Ux card to the specified I/O port
LAN2Mx: /M Only allow to setup LAN2Mx {chipset: MTD90x} cards
/M=port Find & Set a LAN2Mx card to the specified I/O port
/M=E Assign all LAN2Mx cards' chipset to MTD900F version EE
/M=F Assign all LAN2Mx cards' chipset to MTD900F version EF
/M=8 Assign all LAN2Mx cards' chipset to MTD908
/M=C Assign all LAN2Mx/LAN2MC cards' connect media to BNC/Coaxial
/M=T Assign all LAN2Mx/LAN2MT cards' connect media to UTP/Twisted
Note: port: A heximal number for I/O port address
Find & Set: This may helps to rescue from some collision cases,
Especially for those from non-operative ports.
After this option, it needs to power-off and restart!
-------------------------------------------------------------------------------
. To setup adapter cards , a set of parameter value is recommended.
Tolle Software. /U=port :O IRQ ? Hallo?!?

Grüsse

Matthias
https://www.shadowcircuit.de - Die kleine Community rund um Retro Computing
https://www.retroianer.de
Benutzeravatar
struuunz
DOS-Übermensch
Beiträge: 1209
Registriert: Fr 7. Mär 2014, 15:15
Wohnort: Pfalz
Kontaktdaten:

Re: UMC9003 - Netzwerkkarte - IRQ ändern ?!?

Beitrag von struuunz »

Irgend ein Jumper auf der Karte der das verstellen des IRQ per Software verhindert?
Ritter der DOSianer
-- https://dosreloaded.de --
Benutzeravatar
matze79
DOS-Gott
Beiträge: 7910
Registriert: So 9. Sep 2012, 20:48

Re: UMC9003 - Netzwerkkarte - IRQ ändern ?!?

Beitrag von matze79 »

Kannst knicken, Jumperless.
https://www.shadowcircuit.de - Die kleine Community rund um Retro Computing
https://www.retroianer.de
Antworten