Ach hier ist der Thread ;) Kann mein anderer Maus Thread bitte geschlossen werden.
Leider reicht mein Englisch nicht ganz für diese Seite. Soll das dort bedeuten das man mit diesem Adapter PS/2 Mäuse an RS232 also Com1 betreiben kann?
Damit könnten sogar Mäuse Funktionieren die zwar USB sind,aber das PS/2 Protokoll noch unterstützen.
Hat sich den Link mal jemand angeschaut? Mein Englisch ist nicht das beste,aber wenn ich das alles richtig verstehe ist dieser Kasten genau das was gesucht wird bzw. mit Zusatz Netzteil könnte man sogar Optische PS/2 Mäuse verwenden. Sobald ich wieder Flüssiger bin werde ich so einen mal bestellen,wenn mir jemand bestätigt das ich den Text korrekt verstanden habe.
steht doch da: Protokollwandler - musst nur den richtigen besellen (wobei das Ding vmtl. aus einem µController besteht und somit Programmierbar sein sollte)
The VIP-327-PS PS/2 to Serial Mouse Converter allows a PS/2 mouse to be connected to, and operate through any PC's serial com port. The unit is attached in line to the PC's serial com port via a DB9 female / female cable provided with the unit. The PS/2 mouse plugs directly into the unit via the on-board 6 pin mini-DIN connector. The unit is powered from a 5V DC wall mount power supply which is purchased separately. We recommend the VIP-211 , for 100 - 240 V AC 47-63 Hz input, however, you may provide your own supply (see specifications below). After the PC boots up, the PS/2 mouse messages are converted to serial mouse data and delivered to the com port of the PC. Due to the fact that there are several serial mouse protocols, we provide 3 models to cover the most popular protocols.
The VIP-327-PS supports the Microsoft 2 button serial mouse protocol. The VIP-327-PS-3B supports the Mouse Systems 3 button serial mouse protocol, and the VIP-327-PS-SW supports the Microsoft IntelliMouse serial mouse protocol. For optimum operation use the appropriate serial mouse driver on the target PC, as the active mouse driver. This can be accomplished manually, after boot up, via the control panel window of the Operating System. If your Operating System does not have the appropriate driver, it can be downloaded from the manufacturer. For detailed information on the serial mouse protocol, please click here.
Die Unterstrichenen Teile meine ich. Heisst für mich das Teil kommt an den ComPort vorne eine PS/2 Maus dran und es wird ein Serial Maus Treiber installiert und fertig.
Paladin hat geschrieben:
Die Unterstrichenen Teile meine ich. Heisst für mich das Teil kommt an den ComPort vorne eine PS/2 Maus dran und es wird ein Serial Maus Treiber installiert und fertig.
richtig, und du kannst sogar das Protokoll auswählen (MS-Compatibel/Intelli/Busmaus)
@Matze
so heftig ist der unterschied ja nicht (zumindest seriell/PS2)- ist alles Dokumentiert, fragt sich nur obs sinnvoll ist soetwas zusammenzustöpseln - eine Serielle Maus ist praktisch nicht totzukriegen und notfalls pflanzt man die Elektronik in ein anderes Gehäuse...
Passend zum Thema bin ich auf diese Maus in der Bucht gestoßen. Klingt ja vielversprechend. Gerade an meinem Pentium 1 mit dem beiliegenden Adapter von PS/2 auf seriell probiert. Geht nicht. An dem Pentium 4 über PS/2 läuft sie einwandfrei
Ich frage mich gerade, wer dieses Produkt und die Beschreibung zusammengestellt hat ... das kann doch nicht sein! :D
PS/2 ist ein anderes Protokoll als das Serielle. Die Maus muss also beide Protokolle koennen, sonst funktionieren diese mitgelieferten Adapter nicht.
Von Microsoft gibts/gabs die IntelliMouse Serial-PS/2, die das konnte. Andere Hersteller weiss ich jetzt nicht, ob die sowas angeboten haben. Wenns aber wie hier explizit auf der Verpackung steht, sollte man annehmen, dass die Maus auch beide Protokolle unterstuetzt.
Fan von klassischer PC Hardware.
1) Am5x86 auf ASUS VL/I 486SV2GX4, 1MB L2, 64MB RAM, VLB-Monster
2) Am5x86 auf ECS UM8810P-AIO, 512KB L2, 64MB RAM, PCI-486er
genau so einen Adapter gab/gibt es auch von Logitech - von mir unter
>>Re: Ein großer großer Haufen interessanteste Hardware<<
am Mo 6. Okt 2014, 20:12 gepostet, Bildname logi25p ...
schaltplan und uc interessieren mich - den Rest könnte man zur not auch so zusammentüdeln... falls nicht genügend interessenten zusammenkommen um die Platinen zu einem sinnvollem Preis zu fertigen.